COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 105
Apr. 14/16
Testing & Fault Isolation
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
4.
TEST EQUIPMENT REQUIRED
The Model FA2100CVR has been designed as a direct line replaceable unit (LRU) for the
existing Cockpit Voice Recorders, Models A100, A100A, A100S and A200S. As such, the
Model FA2100CVR is to be tested using the same special test equipment built for the
earlier model recorders with the exception of the Model A860 Test Panel which is no
longer supported.
The special test equipment required for use at a FA2100CVR test bench setup consists of
the following units:
L-3AR Read-Out Center/6 (ROC/6)
P/N17TES0400
L-3AR Read-Out Center/7 (ROC/7)
P/N17TES0700
CVR Automated Test Station Software (CATS)
P/N 17TES0420
L
−
3AR Beacon Test Set
P/N 17TES0015
Dukane Beacon Test Set
Dukane 42A12( )
10 Mohm High Impedance Voltmeter
Commercially Available
Audio Data Link Player (ADLP) Software
P/N 17TES0423
(ADLP Software is only required for FA2100CVR P/N: 2100
−
1X25/1X26/1X27
−
( )
for playback only, CATS 2.0+ for Return to Service.)
Note: The Dukane Beacon Test Set may be used as an alternate to the L
−
3AR Beacon Test Set,
and must be purchased directly from Dukane. A 10 Mohm high impedance voltmeter is
required when using the test equipment below, but it is not included in the test set.
For additional information on the special test equipment, refer to the Special Tools And
Test Fixtures Section 900.
The document reference is online, please check the correspondence between the online documentation and the printed version.
