L3 FA2100 CVR Component Maintenance Manual With Illustrated Parts List Download

Page: 250 / 334

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

FA2100CVR

Rev. 15 Page 313

Apr. 14/16

Disassembly

23–70–04

Use or disclosure of information on this sheet is subject

to the restrictions on the cover page of this document.

(10) Carefully lift the Aircraft Interface PWA from the rear panel assembly observing

proper ESD handling precautions.

(11) Remove 2 pan-head screws (1-125) which mount the two lower standoffs (1-120)

on the Aircraft Interface PWA.

(12) Remove the remaining single pan-head screw (1-125) which attaches the center

standoff (1-115) to the Aircraft Interface PWA.

(13) Using a 3/16” hex wrench, unscrew the four top standoff’s (1-110 & 1-120) on the

Aircraft Interface PWA.

(14) Save all Aircraft Interface PWA attaching parts for use with replacement Aircraft In-

terface PWA.

(15) Package Aircraft Interface PWA in an static-resistant container for shipment to the

factory for repair.

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for FA2100 CVR















































































































































































































































































































































Search results

Summary of Contents for FA2100 CVR

Reviews:

Related manuals for FA2100 CVR

Brands by name

Popular brands

L3 FA2100 CVR, Component Maintenance Manual With Illustrated Parts List

Search results

Summary of Contents for FA2100 CVR

Reviews:

Related manuals for FA2100 CVR

Brands by name

Popular brands