47
and time).
(temperatures and times). In fact pressing the right UP
DOWN
scroll keys moves between the
various recipes (the recipes already set are displayed and only the first one blank). Having selected a recipe, wait
-
ing, its parameters will be displayed cyclically. If a recipe is not yet set, the oven will display 0 on both the displays.
Setting a recipe
To set a recipe, once the recipes mode has been activated with the described mode, simultaneously press and
hold the right UP
DOWN
keys. In this way, in the recipe currently being displayed, the values of the
cooking parameters currently selected will be stored as described at the beginning of this chapter. To view the
correct memorisation, the oven shows "
done
" for 2 seconds on the display.
Up to 10 different combinations of cooking parameters
are stored in the menu
which are given by
the following:
Recipe - Chamber Setpoint / Differential
Recipe - Hours/Minutes Timer
Recipe - Water Dosage
Recipe - Core probe stop temperature
Either in manual mode or recipe mode, pressing the "
COOKING CYCLE START/PAUSE
" key
the
oven will commence actual cooking by starting the
preheat
cycle if selected via the "ON/OFF -
SET PARAM-
ETERS
" key
(the display shows "
Preheat
") or if recipe mode
start
or immediate cooking is chosen,
if selected using the "ON/OFF -
SET PARAMETERS
" key
(the display in this case shows "
Start
")
If, in these states, no button is pressed for 20 minutes, the oven returns to standby.
The Preheating cycle is disabled in the case of differential cooking.
Preheating
At this point, the oven is in chamber preheating mode.
It is not possible to manually inject water into the chamber by pressing the “"H2O INJECTION -
COOKING
WITH CORE PROBE
- COOLING" key”
.
By pressing the "
COOKING CYCLE
START/PAUSE
"
key it will be possible to pause or resume the
cycle.
Pressing the "RECIPES -
IGNITIO
N OF LIGHTS IN COOKING CHAMBER"
,
key it will be possible to
turn the chamber light on or off.
Pressing the "ON/OFF -
PARAMETERS
SET"
key once, the oven allows editing of the cooking pa-
rameters and, after having activated the same as in the Setup state, three choices are made available:
1 -
Start
: It passes immediately to the cooking state without waiting for the end of preheating;
2 -
Stop
: It stops everything taking the oven to the Setup mode;
3 -
Run
: Preheating continues with any changes to the parameters just made.
It is possible to exit with timeout of 5 seconds from last pressing of the button. In this case, the oven applies
the new settings.
Upon reaching the chamber set point, the oven beeps and shows the message
Start
while still continuing tem-
perature control of the chamber.
To continue, press "
COOKING CYCLESTART/PAUSE
"
.
Where the Fan folder parameters are appropriately set, fan reversal will be managed with downtime. During the
downtime, the fans injection and power to the heating elements will be inhibited.
22
Summary of Contents for VULCAIN-2/3
Page 25: ...49 NOTES 24...
