36
6. MAINTENANCE
All maintenance operations and repairs must be carried out with the unit in stop position
and with the power
switched off
.
When parts are being replaced and when removal of the plug is foreseen, and removal of the plug is
clearly indicated, it must be such that an operator may check, from any point to which he has access,
that the plug remains disconnected.
ATTENTION
All of these operations must be done by a qualified technician!
ATTENTION
Always wait that the oven cools down paying attention not to touch the heating elements inside it; carry
out the replacement afterwards.
Attention!During maintenance operations, it is high recommended to use working gloves.
6.1 PERIODICAL CHECKS
At regular intervals (at least once a year)
it is important to make a complete system check by qualified
technician
, As follow:
•
the
state of maintenance of the electrical
, installation is fully safe.
•
the door closes properly
and the gaskets are not squeezed
•
proper operation of the fans
•
operation of the lamp(s).
•
periodically check the
integrity of the oven door gasket
.
6.2 DOOR GASKET REPLACEMENT
1
All oven models are equipped with a gasket, easily extractable for
clearing or replacement.
Periodically check the integrity of the
oven door gasket.
For an accurate clearing of the oven, the gasket is interlocking, there-
fore easily removable as follows:
1) Lightly pull a corner of the gasket outwardly and remove it from
its housing.
2) Replacing the gasket
11
Summary of Contents for VULCAIN-2/3
Page 25: ...49 NOTES 24...
