Kysor/Warren 6RLG3, Installation & Operation Manual

Page: 71 / 92

Do not use a hose or submerge shelves in water. When cleaning lighted shelves, wipe
down with a wet sponge or cloth so that water does not enter the light rails. Special care
must also be taken to introduce moisture into the openings of the electrical wire-way
located on the underside front of the case.
Mirrors
WARNING! Always shut power off during the cleaning process. Cleaning the
case with electrical power applied is a shock hazard that may cause serious injury
or death.
Mirrors are sheets of clear glass that have a very thin reflective coating applied to one side.
These coatings are susceptible to deterioration if certain cleaning solutions and even water are
allowed to come in contact with them. Every precaution should be made to keep liquids away
from the coated side of the mirrors. If liquids are allowed to flow along the face side of the
mirror to its edge, the liquid can seep between the coating and the glass, causing serious damage.
To help prolong the life of the mirrors:
o Use only mild cleaning solutions (Windex, Solox, or a weak solution of vinegar and
water.)
o Do NOT spray liquids on mirrors. Dampen the cleaning cloth, then use the cloth to wipe
the mirror.
o Wipe water from the mirrors immediately to prevent difficult to remove water spots and
also to prevent the water from reaching the mirrors edge.
o Never use dirty cloths, scrapers or any other abrasive materials for cleaning.
Fans
WARNING! Always shut power off during the cleaning process. Cleaning the
case with electrical power applied is a shock hazard that may cause serious injury
or death.
Remove all dust, film, oil from the fans and fan blades using a commercially available cleaner.
Follow the instructions provided for the cleaner that has been selected. After cleaning, ensure all
electrical connections are dry and free of all foreign matter.
CLEANING
70