Kysor/Warren 6RLG3, Installation & Operation Manual

Page: 37 / 92

Electrical Connections
For safety purposes and to reduce the potential for injury or death to installation personnel, and
to reduce the potential to harm the equipment during the installation process, all warnings and
cautions for electrical installation are repeated. Please read and understand all warning and
cautions before proceeding with the electrical installation. If the installer should have any
questions regarding the electrical installation, please contact the Kysor//Warren Service
Representative.
WARNING! Ensure the Kickplate does not come in contact with the case
electrical wiring. Live electrical wiring that comes in contact with the case is a
shock hazard that may cause severe injury or death by electrocution.
WARNING! Always disconnect the electrical power at the main disconnect when
servicing or replacing any electrical component. This includes, but is not limited
to, such items as fans, heaters, thermostats and lights. Failure to disconnect the
electrical power may result in personal injury or death.
WARNING! It is imperative that the pins of the bulbs and the shelf power cords
be completely seated in their respective lamp holder or receptacle. If they are not
completely seated, an electrical arc could occur which will cause the lamp holders
or the shelf light receptacles to melt and become an electrical hazard. Care must
be taken during cleaning and stocking processes to insure that the bulbs and shelf
cords are not dislodged.
Caution: Ensure all National Electric Codes (NEC) and local electric codes are
understood and followed. Failure to follow all existing codes may result in equipment
damage and may void the equipment warranty. Adherence to electrical codes for field
wiring is the responsibility of the installing electrical contractor.
All field connections are made in the electrical raceway. Make sure that proper voltage is
supplied to your case. Check case nameplate for the required voltage for fans, anti-sweat heaters,
lights and defrost heaters.
UNIT INSTALLATION
36