Kysor/Warren 6RLG3, Installation & Operation Manual

Page: 58 / 92

Case Trim
This paragraph provides the instructions for removing the various case trim located throughout
the case and is dependant upon configuration/line up.
Kickplate Trim
The kickplate trim is located on the front of the kickplate. To install the kickplate trim, perform
the following:
1. Remove the kickplate trim by sliding the trim out of the retaining slots in the kickplate.
End Kickplate Trim
The end kickplate trim is located on cases with ends on them. To remove the end kickplate trim,
perform the following:
1. Remove the end kickplate trim by sliding the trim out of the retaining slots in the end
kickplate.
2. Remove end kickplate trim.
Canopy/Colorband/Upper Front Trim
The canopy/colorband/upper front trim is located on all cases. Remove the
canopy/colorband/upper front trim as follows:
1. Remove the canopy/colorband/upper front trim by sliding the trim out of the retaining slots
in the canopy/colorband/upper front panel.
2. Remove canopy/colorband/upper front trim.
Joint Trim
The joint trim is located between the joints that occur when joining one case to another case. To
remove the joint trim, perform the following:
1. Remove the screws that secure the joint trim to the case(s).
2. Remove joint trim.
REMOVAL/DISASSEMBLY
57