10-28
Troubleshooting > Troubleshooting
S
Message
Checkpoints
Corrective Actions
Reference
Page
Scanner memory is
full.
*1
—
Scanning cannot be performed due
to insufficient memory of scanner.
Only one copy of the scanned
pages is available. Select
[
Continue
] to print, send or store
the scanned pages. Select [
Cancel
]
to cancel the printing job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Reduce the number of originals
to be scanned at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
•
Select [
Copy Priority
] of
Optional Memory in System
Menu.
NOTE
Before changing the Optional
Memory setting, contact your
administrator.
—
Send Error.
—
An error has occurred during
transmission. The job is canceled.
Select [
End
].
Refer to
for the error code and corrective
actions.
SSD error.
—
An error has occurred on SSD. Job
is canceled. Select [
End
].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
—
Staple is empty.
Has any of the document finisher
run out of staples?
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the screen. Leave the machine on
and follow the instruction to replace
the staple case.
Select [
Continue
] to print without
stapling. Select [
Cancel
] to cancel
the job.
—
