Kyocera TASKalfa 307ci Operation Manual Download Page 284

Page: 284 / 462

8-17

Setup and Registration (System Menu) > System Menu

Zoom

Select the enlarged/reduced default when paper size/sending size changed after the originals set.

Value

: 100%, Auto

Continuous Scan (Copy)

Set the continuous scan defaults.

Value

: Off, On

Continuous Scan (FAX)

FAX System 11 Operation Guide

Continuous Scan (Send/Store)

Set the continuous scan defaults.

Value

: Off, On

File Name Entry

Set an automatically entered name (default) for jobs. Additional information such as Date and
Time and Job No. can also be set.

Value

File Name: Up to 32 characters can be entered.
Additional Info: None, Date and Time, Job No., Job No. & Date and Time, Date and Time
& Job No.

E-mail Subject/Body

Set the subject and body automatically entered (default subject and body) when sending the
scanned originals by E-mail.

Value

Subject: Up to 60 characters can be entered.
Body: Up to 500 characters can be entered.

FTP Encrypted TX

Set the default value for document encryption during transmission.

Value

: Off, On

NOTE

This setting is displayed when the secure protocol "SSL" setting is [

JPEG/TIFF Print

Select the image size (resolution) when printing JPEG or TIFF file.

Value

: Paper Size, Image Resolution, Print Resolution

XPS Fit to Page

Set the default value for the XPS fit to page function.

Value

: Off, On

Detail Settings

—

Image Quality

Set the default value for the image quality adjustment range when selecting the file format with
which to send and store images.

Value

: 1 Low (High Comp.), 2, 3, 4, 5 High (Low Comp.)

PDF/A

Set the default value for PDF/A when selecting the file format with which to send and store
images.

Value

: Off, PDF/A-1a, PDF/A-1b

High Comp. PDF

Select the default quality setting for high compressed PDF files.

Value

: Compression Ratio Priority, Standard, Quality Priority

Blank Detection Level
(Copy)

Select the default Blank Detection Level (Copy) settings.

Value

: Low, Middle, High

Blank Detection Level
(Send/Store)

Select the default Blank Detection Level (Send/Store) settings.

Value

: Low, Middle, High

Item

Description

Summary of Contents for TASKalfa 307ci















































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 307ci

Reviews:

Related manuals for TASKalfa 307ci

Brands by name

Popular brands

Kyocera TASKalfa 307ci, Operation Manual

Search results

Summary of Contents for TASKalfa 307ci

Reviews:

Related manuals for TASKalfa 307ci

Brands by name

Popular brands