8-28
Setup and Registration (System Menu) > System Menu
Auto cassette Change
Select the following actions when the paper runs out in the paper source while printing.
Value
: Off, On
NOTE
When selecting [
Off
], the machine displays "Add the following paper in cassette #." (# is a
cassette number) or "Add the following paper in the multi purpose tray.", and stops printing.
Load the paper according to the paper source displayed to resume printing.
To print from the other paper cassette, select [
Paper Selection
]. Select the desired paper
source.
When selecting [
On
], the machine continues printing automatically when the other cassette
contains the same paper as the currently-used cassette.
Gloss Mode
Gloss Mode increases the effect of glossiness in printing. However, printing takes longer time.
Value
: Off, On
IMPORTANT
Gloss Mode is not available when [Labels] or [Transparency] is selected as the paper
type setting.
Cassette/MP Tray Settings (page 8-8)
Depending on the paper used, printing in gloss mode may cause curl in paper.
To reduce curl, try using thicker paper.
Printing Job Terminator
You can select the condition which regarded as a job termination if the print job could not be
processed until the end due to your environment and the other reason.
Value
EOJ (End of Job): The command recognized as a termination of the job data is regarded
as one job until it is detected.
End of Network Session: The data included in a network session at network connection
is regarded as one job.
UEL (Universal Exit Language): The UEL included in the termination of the job data is
regarded as one job until it is detected.
Item
Description
