Kyocera TASKALFA 300I Page 57 Operation Manual Download

Page: 57 / 426

Preparation before Use

2-19

Sending E-mail

Specifying the SMTP settings allows you to send images loaded onto this machine as E-mail attachments.

To use this function, this machine must be connected to a mail server using the SMTP protocol.

Before sending images loaded onto this machine as E-mail attachments, check the following:

•

The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.

•

SMTP Settings
Use COMMAND CENTER to register the IP address or host name of the SMTP server.

•

If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.

The procedure for specifying the SMTP settings is explained below.

Click Advanced -> SMTP -> General.

Summary of Contents for TASKALFA 300I











































































































































































































































































































































































































































Search results

Summary of Contents for TASKALFA 300I

Reviews:

Related manuals for TASKALFA 300I

Brands by name

Popular brands

Kyocera TASKALFA 300I, Operation Manual

Search results

Summary of Contents for TASKALFA 300I

Reviews:

Related manuals for TASKALFA 300I

Brands by name

Popular brands