Kyocera TASKALFA 300I Operation Manual Download Page 304

Page: 304 / 426

Default Setting (System Menu)

8-72

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.

The following interface block settings are available:

•

USB Host (USB memory slot setting)

•

USB Device (USB interface setting)

•

Optional interface (Optional interface card setting)

USB Host (USB memory slot setting)

This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is

Unblock

Use the procedure below to specify the USB Host setting.

Press the

System Menu

key.

Press [System], [Next] of

Interface Block Setting

and then [Change] of

USB Host

NOTE:

If user login administration is disabled, the user authentication screen appears. Enter your login user

name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to

Adding a User on page 11-5

for the default login user name and password.

Press [Block].

Press [OK].

USB Device (USB interface setting)

This locks and protects the USB interface connector (B1) (USB Device). The default setting is

Unblock

Use the procedure below to specify the USB Device setting.

Press the

System Menu

key.

Press [System], [Next] of

Interface Block Setting

and then [Change] of

USB Device

Press [Block].

Press [OK].

Optional interface (Optional interface card setting)

This locks and protects the optional interface slots (OPT1 or OPT2). The default setting is

Unblock

Use the procedure below to specify the optional interface setting.

Press the

System Menu

key.

Press [System], [Next] of

Interface Block Setting

and then [Change] of

Optional Interface 1 or Optional

Interface 2

Press [Block].

Press [OK].

Summary of Contents for TASKALFA 300I











































































































































































































































































































































































































































Search results

Summary of Contents for TASKALFA 300I

Reviews:

Related manuals for TASKALFA 300I

Brands by name

Popular brands

Kyocera TASKALFA 300I, Operation Manual

Search results

Summary of Contents for TASKALFA 300I

Reviews:

Related manuals for TASKALFA 300I

Brands by name

Popular brands