Kyocera ECOSYS P4140dn Operation Manual Download Page 149

Page: 149 / 276

8-2

Setup and Registration (System Menu) > System Menu

System Menu

Configure settings related to overall machine operation.
Select the [

Menu

] key to show the settings on the message display. Then, select from the settings displayed.

Refer to

Menu Settings

on the following page and configure as needed.

Operation Method (page 2-11)

NOTE

• In order to change settings that require administer privileges, you must log in with administrator privileges.



The factory default login user name and login password are set as shown below.

Login User Name:

4000

Login Password:

4000

• If function default settings have been changed, the [

Reset

] key can be selected in each function screen to

immediately change the settings.

Summary of Contents for ECOSYS P4140dn





















































































































































































































































































Search results

Summary of Contents for ECOSYS P4140dn

Reviews:

Related manuals for ECOSYS P4140dn

Brands by name

Popular brands

Kyocera ECOSYS P4140dn, Operation Manual

Search results

Summary of Contents for ECOSYS P4140dn

Reviews:

Related manuals for ECOSYS P4140dn

Brands by name

Popular brands