Layout
5
Click
OK
to return to the
dialog box.
6
Click
OK
to start printing.
Scaling
Scaling
increases or decreases text and graphics on a page. You can also
select a gutter setting that enlarges the margins to accommodate stapling or
hole punch. Scaling is unavailable when
Booklet
,
Poster
or
Multiple pages
per sheet
is selected.
Setting Scaling on the Page
You can increase or decrease text and graphics on a page.
1
In the
Layout
tab, select
Scaling
.
2
Type or select a percentage between 20 to 500.
Scaling
adjusts proportionately the height and width of the page. A lower
percentage reduces the page and a higher percentage enlarges the page.
3
Click
OK
to return to the
dialog box.
4
Click
OK
to start printing.
Gutter
A gutter creates additional blank space on the left side and at the top of the
sheet. It is often used for binding, hole punch or stapling to make a print job
easier to read. Increasing the measurements in
Gutter
increases the margins
around your text and graphics on the left side, or top of the printed sheet. This
creates a larger margin space by shifting the printable area to the right, or down
as much as one inch (25.4 mm).
Creating a Gutter
You can increase the margins on the left side and at the top of the printed sheet.
1
In the
Layout
tab, click
Gutter
.
2
In the
Gutter width
options, type or select a value between 0.20 to 1.00 inches
(5.0 to 25.4 mm).
Long edge (left)
This selection modifies the outside margin on the left-side of the page.
Short edge (top)
This selection modifies the outside margin on the top-edge of the page.
Note:
Availability of
Gutter
settings varies depending on
Orientation
and
Duplex mode
settings in the
Basic
tab.
KX DRIVER
5-2
Summary of Contents for ECOSYS FS-C5150DN
Page 1: ......
Page 95: ...Rev 12 21 2010 8 ...
