Device Settings
Auto Configure
Auto Configure
detects the devices installed on the printing system if it is
connected over a network.
Auto Configure
can detect printing system devices
such as input devices. When your computer is connected to the printing system
through a TCP/IP or WSD port, the
Auto Configure
button appears in
Device
Settings
.
Auto Configure
updates the
Device options
list,
Memory
,
RAM
disk
and preview images to keep the printer driver consistent with the printing
system configuration.
Not all installed devices are detected by using
Auto Configure
. Before
selecting
OK
in
Device Settings
, check the settings to make sure that they are
correct.
Note:
The default setting for Windows XP Service Pack 2 is for the Windows
Firewall to be set to
On
. The setting can be changed to allow communication
between the printing system and your computer. In the Windows
Security
Alert
dialog box, click
Unblock
.
Silent Auto Configuration
Silent auto configuration
checks the printing system every 10 minutes for
changes in optional devices or memory. When a change is detected, the driver
is automatically updated with the new settings.
Silent auto configuration
is
only available for printing systems installed in Windows 7 or Windows Vista.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Enabling Auto Configuration
The
Auto Configure
button can be used to detect all available device options
when the printing system is connected to a network through a TCP/IP port.
1
Verify that all optional devices are attached to the printing system, and that it is
turned on and ready to print.
2
In
Device Settings
, click
Auto Configure
.
In Windows XP and Windows 2000, the driver settings are updated
immediately.
In Windows 7 and Windows Vista, the
Auto Configure
dialog box opens. Select
from Auto configure options:
Auto Configure Now
Click the button at any time to retrieve the current settings from the printing
system. It is recommended to do this when the driver is first installed and
when
Silent auto configuration
is turned off.
Silent auto configuration
Select to let the driver check the printing system every 10 minutes for any
changes in optional devices or memory. When a change is detected, the
driver is automatically updated with the new settings.
Memory
Memory is the amount of standard and optional memory installed in the printing
system. To maximize the downloading of printing system fonts, the driver must
be set to match the total printing system memory.
User Guide
2-3
Summary of Contents for ECOSYS FS-C5150DN
Page 1: ......
Page 95: ...Rev 12 21 2010 8 ...
