Kyocera Ecosys FS-6700, Service Manual

Page: 33 / 167

Troubleshooting
User-recoverable errors
6-14 FS-6700
For details on memory card availability, see section Printer specifications in chap-
ter 1.
03 SRAM/flush Non PCMCIA card. Replace the card with a PCMCIA card.
04 SRAM Not RAM card. Use a SRAM-type card if you want to write data
to an memory card.
05 SRAM Memory card battery error. Replace the memory card’s internal
battery with a new one.
06 SRAM Memory card protect error. Release the write protection on the
memory card when you write data to the memory card.
07 SRAM Non-Kyocera format. Reformat the memory card using MODE
SELECT (See the printerís userís manual).
08 SRAM Partition name error. Follow instructions given attempt in
Chapter 2 to properly name the destination.
09 SRAM Memory card data full error (An attempt was made to write
data exceeding the capacity of the memory card). Abandon the
writing operation on the host computer first. Press CONTINUE
key; when the message turns to Waiting, press FORM FEED
key (Ready).
10 - Reserved
11 SRAM Data name full (An attempt was made to write more than 127
destination data names). Press CONTINUE key (Ready).
12 - Reserved
13 Flush Erase logic error with flash memory card. Try replacing the
memory card.
14 - Reserved
15 Flash Non PCMCIA flush card. Replace the card with a PCMCIA
flush card.
16 - Reserved
17 Flush Unable to write to the flash memory card due to insufficient
printer memory. Either delete unnecessary macros or fonts
stored in the printer, or extend the printer’s available memory.
18 Flush Writing error. Try replacing the memory card.
19 - Reserved
Table 6. 6 Memory card errors
Error
code
Applicable
card type
Meaning