Kyocera ECOSYS FS-1035MFP/DP, Service Manual

Page: 105 / 270

2MH/2MJ/2MK/2ML
1-4-8
(2) Self diagnostic codes
Code Contents
Remarks
Causes
Check procedures
/corrective measures
0030 FAX control PWB system error
Processing with the fax software
was disabled due to a hardware
problem.
Defective FAX
control PWB. Replace the FAX control PWB (See
page 1-5-48).
0070 FAX control PWB incompatible
detection Error
Abnormal detection of FAX control
PWB incompatibility In the initial
communication with the FAX control
PWB, any normal communication
command is not transmitted.
Defective fax
software. Install the fax software.
Defective FAX
control PWB. Replace the FAX control PWB (See
page 1-5-48).
0100 Backup memory device error
Defective flash
memory. Replace the control PWB (See page 1-
5-37).
Defective control
PWB. Replace the control PWB (See page 1-
5-37).
0120 MAC address data error
Defective flash
memory. Replace the control PWB (See page 1-
5-37).
0130 Backup memory read/write error
Defective flash
memory. Replace the control PWB (See page 1-
5-37).
Defective control
PWB. Replace the control PWB (See page 1-
5-37).
0140 Backup memory data error
Defective flash
memory. Replace the control PWB (See page 1-
5-37).
Defective control
PWB. Replace the control PWB (See page 1-
5-37).
0150 Control PWB EEPROM error
Detecting control PWB EEPROM
(U17) communication error.
Improper installa-
tion control PWB
EEPROM (U17). Check the installation of the EEPROM
(U17) and remedy if necessary (See
page 1-5-37).
Defective control
PWB. Replace the control PWB (See page 1-
5-37).
Data damage of
control PWB
EEPROM (U17). Contact the Service Administrative Divi-
sion.
0170 Billing counting error
Defective control
PWB. Replace the control PWB (See page 1-
5-37).
Data damage of
control PWB
EEPROM (U17). Contact the Service Administrative Divi-
sion.