Kyocera ECOSYS FS-1035MFP/DP, Service Manual

Page: 117 / 270

2MH/2MJ/2MK/2ML
1-4-20
(4) Black dots.
(5) Black horizontal streaks.
(6) Black vertical streaks.
Print example Causes Check procedures/corrective measures
Defective drum unit or developer
unit. If the defects occur at regular intervals of 94 mm/3
11/16
"
(See page 2-4-3), the problem may be the damaged
drum (in the drum unit). Replace drum unit (See page 1-
5-28).
If the defects occur at random intervals, the toner may
be leaking from the developer unit or drum unit. Replace
the developer unit or drum unit (See page 1-5-27 or 1-5-
28).
Print example Causes Check procedures/corrective measures
Defective drum unit's ground. Check that the drum shaft and the grounding tab
(machine) are in good contact. Apply the grounding tab
a small amount of electroconductive grease as required.
Defective drum unit. Replace the drum unit (See page 1-5-28).
Print example Causes Check procedures/corrective measures
Adhesion of oxide to main char-
ger wire. Remove the drum unit (See page 1-5-28). Slide the
charger cleaner (green) left and right 2 or 3 times to
clean the charger wire, then return it to its original posi-
tion (CLEANER HOME POSITION). Refer to the opera-
tion guide.
Defective drum unit. A streak of toner remaining on drum after printing
means that the cleaning blade (in the drum unit) is not
working properly. Replace the drum unit (See page 1-5-
28).
Defective developer roller
(developer unit). Replace the developer unit (See page 1-5-27).
ABC
123
ABC
123
ABC
123