Kyocera ECOSYS FS-1035MFP/DP, Service Manual

Page: 66 / 270

2MH/2MJ/2MK/2ML
1-3-35
U632 Setting the CNG detection times in the fax/telephone auto select mode
Sets the CNG detection times in the fax/telephone auto select mode.
1. Select the setting using the cursor up/down keys.
* : Initial setting: 2TIMES
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U633 Setting communication control 4
Description
Makes settings for fax transmission regarding the communication.
Purpose
To reduce transmission errors when a low quality line is used.
Method
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Enabling/disabling V.34 communication
Sets whether V.34 communication is enabled/disabled for transmission and reception.
1. Select the setting using the cursor up/down keys.
* : Initial setting: ON
2. Press the start key. The setting is set.
Item No. Description
Display Description
1TIME Detects CNG once.
2TIMES Detects CNG twice.
Display Description
V.34 Enables or disables V.34 communication.
V.34-3429Hz Sets the V.34 symbol speed (3429 Hz).
DIS 2RES Sets the number of times of DIS signal reception.
RTN CHECK Sets the reference for RTN signal output.
Display Description
ON V.34 communication is enabled for both transmission and reception.
TX V.34 communication is enabled for transmission only.
RX V.34 communication is enabled for reception only.
OFF V.34 communication is disabled for both transmission and reception.