manualshive.com logo in svg

Kyocera ECOSYS FS-1035MFP/DP, Service Manual, Page: 125 / 270

Share
Download
Kyocera ECOSYS FS-1035MFP/DP Service Manual Download Page 125

2MH/2MJ/2MK/2ML

1-4-28

1-4-6  Send error code

This section describes the scanning errors and descriptions, preventive actions, as well as corrective actions.
Error codes not described here could fall within software errors.
If such an error is encountered, turn power off then on, and advise the service representative.

(1) Scan to SMB error codes

Code

Contents

Check procedures/corrective measures

1101

Host destined does not exist on the net-
work.

1. Confirm the destined host.
2. Confirm thedevice's network parameters.
3. Confirm the parameters of the network to which the 

device is connected are correct.

1102

Login to the host has failed.

1. Confirm user name and password.
2. Confirm the parameters of the network to which the 

device is connected are correct.

3. Check the host if the folder is properly shared.

1103

Destined host, folder, and/or file names 
are invalid.

1. Check illegal characters are not contained within 

these names.

2. Check the name of the folder and files conform with 

the naming syntax.

3. Confirm destined host and folder.

1105

SMB protocol is not enabled.

1. Confirm device's SMB protocols.

2101

Login to the host has failed.

1. Confirm  the destined host.
2. Confirm that the LAN cable is properly connected to 

the device.

3. Check the SMB port number.
4. Confirm the device's network parameters.
5. Confirm the parameters of the network to which the 

device is connected are correct.

2201

Writing scanned data has failed.

1. Check the file name to save the scanned data.
2. Confirm the device's network parameters.
3. Confirm the parameters of the network to which the 

device is connected are correct.

2203

No response from the host during a cer-
tain period of time.

1. Confirm the network parameters the device is con-

nected.

2. Confirm that the LAN cable is properly connected to 

the device.

Summary of Contents for ECOSYS FS-1035MFP/DP















































































































































































































































































Reviews:

No comments