manualshive.com logo in svg

Kyocera ECOSYS FS-1035MFP/DP, Service Manual, Page: 36 / 270

Share
Download
Kyocera ECOSYS FS-1035MFP/DP Service Manual Download Page 36

2MH/2MJ/2MK/2ML

1-3-5

(3) Contents of the maintenance mode items

Item No.

Description

U000

Outputting an maintenance report

Description

Outputs lists of the current settings of the maintenance items and paper jam and service call 
occurrences. Outputs the event log. Also sends output data to the USB memory.
Printing a report is disabled either when a job is remaining in the buffer or when [Pause All Print 
Jobs] is pressed to halt printing.

Purpose

To check the current setting of the maintenance items, or paper jam or service call occurrences. 
Before initializing or replacing the backup RAM, output a list of the current settings of the mainte-
nance items to reenter the settings after initialization or replacement.

Method

1. Press the start key.
2. Select the item to be output using the cursor up/down keys.

3. Press the start key. A list is output.

Method: Send to the USB memory

1. Turn the power switch off.
2. Insert USB memory in USB memory slot.
3. Turn the power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the item to be send.
7. Select [TEXT] or [HTML].

8. Press the start key.

Output will be sent to the USB memory.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Display

Output list

MAINTENANCE

List of the current settings of the maintenance modes

EVENT

Outputs the event log

ALL

Outputs the all reports

Display

Output list

Print

Outputs the report

USB (TEXT)

Sends output data to the USB memory (text type)

USB (HTML)

Sends output data to the USB memory (HTML type)

Summary of Contents for ECOSYS FS-1035MFP/DP















































































































































































































































































Reviews:

No comments