Kyocera ECOSYS FS-1035MFP/DP Service Manual Download

Page: 45 / 270

2MH/2MJ/2MK/2ML

1-3-14

U251

Checking/clearing the maintenance count

Description

Displays, clears and changes the maintenance count.

Purpose

To check the maintenance count.
Also to clear the count during maintenance service (replacing the maintenance kit).

Method

1. Press the start key. The maintenance count is displayed.

Setting

1. Select [M.CNT A] using the cursor up/down keys.
2. Change the setting using the cursor left/right keys or numeric keys.

3. Press the start key. The count is set.

Clearing

1. Select [CLEAR] using the cursor up/down keys.
2. Press the start key. The count is cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Item No.

Description

Setting range

Initial setting

Maintenance count

0 to 9999999

Summary of Contents for ECOSYS FS-1035MFP/DP















































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Service Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands