KYMCO MXU 500i Manual Download

Page: 135 / 171

8-22

4. Separate the air cleaner element.

5. Gently wash the air cleaner in clean, nonflammable (high

flash point) solvent such as kerosene not gasoline. Allow

the air cleaner to dry thoroughly before applying oil. A wet

air cleaner will not fully absorb the oil.

POTENTIAL HAZARD

Using gasoline or low flash point solvents for cleaning ATV parts.

WHAT CAN HAPPEN

A fire or explosion could result.

HOW TO AVOID THE HAZARD

Use only a nonflammable or high flash point solvent to clean ATV parts.

6. Soak the air cleaner an equivalent (gear oil:

SAE 80 - 90) until saturated, then squeeze out the excess oil.

NOTE

The element should be wet but not dripping.

Twisting the air cleaner when squeezing out excess oil could

damage the air cleaner.

Reassemble by reversing the disassembly sequence.

Summary of Contents for MXU 500i












































































































































































Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands

KYMCO MXU 500i, Manual

Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands