KYMCO MXU 500i Manual Download

Page: 96 / 171

7-8

7.8. DO NOT OPERATE AT SPEEDS TOO

FAST YOUR SKILLS OR THE

CONDITIONS.

POTENTIAL HAZARD

Operating this ATV at speeds too fast for your skills or the

conditions.

WHAT CAN HAPPEN

Increases your chances of losing control of the ATV, which can

result in an accident.

HOW TO AVOID THE HAZARD

Always go at a speed that is proper for the terrain, visibility and

operating conditions, and your experience.

7.8.1. Speed limiter

For riders inexperienced with this model, this model is

equipped with a speed limiter in the throttle lever housing. The

speed limiter limits the power and top speed of the machine.

Turning the screw in decreases top speed, and turning it out

increases top speed.

(1) Adjuster (2) Locknut

Summary of Contents for MXU 500i












































































































































































Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands

KYMCO MXU 500i, Manual

Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands