KYMCO MXU 500i Manual Download

Page: 68 / 171

5-6

5.2. FRONT AND REAR BRAKES

Make sure there is no brake fluid leakage.

Check operation of the levers and pedal. They should

move smoothly and there should be a firm feeling when

the brake is applied. If not, have the machine inspected

by a KYMCO dealer.

Brake operation Test the brakes at slow speed after

starting out to make sure they are working properly. If the

brakes do not provide proper braking performance,

inspect the brakes for wear.

POTENTIAL HAZARD

Riding with improperly operating brakes.

WHAT CAN HAPPEN

You could lose braking ability, which could lead to an accident.

HOW TO AVOID THE HAZARD

Always check the brakes at the start of every ride. Do not ride

the ATV if you find any problem with the brakes. If a problem

cannot be corrected by the adjustment procedures provided in

this manual, have the ATV inspected by a KYMCO dealer.

Summary of Contents for MXU 500i












































































































































































Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands

KYMCO MXU 500i, Manual

Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands