KYMCO MXU 500i Manual Download Page 6

Page: 6 / 171

IMPORTANT NOTICES

KYMCO and the ATV Safety Institute recommend that all

ATV operators ride an ATV appropriate for their age.

Age (Years)

Engine Size (cc)

Speed Limitations (MPH)

6-11

Up to 70

10 - Governed

15 - Maximum

12-15

Up to 90

15 - Governed

30 - Maximum

16 and Older

Over 90

According to Local

Regulations

READ THIS MANUAL CAREFULLY

Your owner’s manual contains important information on safety, operation, and maintenance. Anyone who operates this ATV should

carefully read and understand the contents of this manual before riding the vehicle.

AGE RECOMMENDATION

The minimum recommend age for this ATV model is 16. Children under age 16 should never operate this vehicle.

RIDER TRAINING

Anyone who operates this vehicle should get proper instruction.

Use ATV

Please check your local riding law and regulations before operating this machine.

Summary of Contents for MXU 500i












































































































































































Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands

KYMCO MXU 500i, Manual

Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands