KYMCO MXU 500i, Manual

Page: 43 / 171

4-16
4.3.3. Hazard switch
When the hazard switch is pressed, the right and left turn signal
lights flash together. The instrument turn signal indicator light
will also flash when the switch is operated.
When the hazard switch is released, the right and left turn
signal lights go out together.
NOTE
Do not use the hazard lights for an extended length of time with
the engine not running, otherwise the battery may discharge.
Turn on this switch when parking or there is a special condition.
After the hazard switch is turned on, it will not reset
automatically. Be sure to reset it after use to avoid affecting the
traffic safety. When the signal lights are flashing, the hazard
switch does not work.
When the ignition switch is "OFF”, the hazard light will still work.
(4) Headlight dimmer switch
4.3.4. Headlight dimmer switch
Turn the switch to the position to switch on the low beam.
Turn the switch to the position to switch on the high beam.
When you turn on the ignition switch and engine is not running
the battery may become discharged result to damage.