KYMCO MXU 500i Manual Download

Page: 109 / 171

7-21

POTENTIAL HAZARD

Stalling, rolling backwards or improperly dismounting while

climbing a slope.

WHAT CAN HAPPEN

Could result in ATV overturning.

HOW TO AVOID THE HAZARD

Maintain steady speed when climbing a slope.

If you lose all forward speed:

Keep weight up slope.

Apply the brakes.

Shift to the parking position “P” after you are stopped.

Lock parking brake.

If you begin rolling backwards:

Keep weight up slope.

2WD: Never apply the rear brake while rolling backwards.

Apply the front brake.

4WD: Apply both front and rear brakes gradually.

When fully stopped, shift to the parking position “P”.

When fully stopped, apply front brake as well, and then lock

parking brake.

Dismount on up slope side or to a side if pointed straight up

slope. Turn the ATV around and remount, following the

procedure described in the Owner's Manual.

Summary of Contents for MXU 500i












































































































































































Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands

KYMCO MXU 500i, Manual

Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands