44
Adjust the plow
Working depth
•
The plow frame should always remain parallel to the ground.
•
The top link should be in the centre of the tractor.
•
After changing the working depth, the sideways levelling should be
checked (see next section)
Changing the plowing depth
> Raise the plow carefully
> Adjust the depth wheel (see below)
> Adjust the lower link arms with the tractor’s three-point control
> Adjust the length of the top link
> Level the plow sideways
→
»Levelling«
Depth wheel
To adjust the depth wheel, do the following with both depth stops
> Adjust the counter nut
> Adjust the depth stop
> Tighten the counter nut again
T
IP
A useful way to measure the working depth, both on the left and the
right
> Measure the depth of the last furrow
> Measure the length of both stops. Ensure that both stops are of the
same length.
Wrong adjustment
Right adjustment
Depth stop
Counter nut
Both stops the same length
L
Summary of Contents for ES
Page 9: ...Safety 9 ...
