Kverneland ES Operator'S Manual Download Page 25

Page: 25 / 82

Optional equipment

Hydraulic depth/transport wheel

A depth/transport wheel, allowing the plow depth to be set hydraulical

ly during plowing. This cylinder function can also be used at the end
of each furrow for a more even plowing on long plows.

Lighting for transport

Attachable/detachable lighting is available for road transport, in com

pliance with local regulations. Several configurations are available for
the different markets. Available for transport both in plowing setting
and semi-rotated setting.

Packomat

Kverneland Packomat is a soil packer which is integrated into the plow
and which ensures optimum combination of both. Kverneland’s inte

grated soil packer harrows and packs the soil once it is in an easily
workable state, and in some cases (lightweight soil) saves all harrow

ing, and in all cases some harrowing.

Can be supplied with a single roller or double roller section.

Soil packer arm

Available for use with the soil packer. A hydraulic cylinder releases the
soil packer on the headland.

Summary of Contents for ES



















































































Search results

Summary of Contents for ES

Reviews:

Brands by name

Popular brands

Kverneland ES, Operator'S Manual

Search results

Summary of Contents for ES

Reviews:

Brands by name

Popular brands