42
Adjust the plow
Working width
Mechanically
> Adjust the working width on the turnbuckle. Use the spanner which
is supplied.
Hydraulically [plows without alignment cylinder]
> Adjust the working-width cylinder using the tractor’s hydraulic out
-
let
Hydraulically [plows with sequence valve]
> Swing the plow slightly inwards by starting the rotating sequence
with the tractor’s spool valve
> Adjust the stop nut on the alignment cylinder
> Swing the plow out by activating the tractor’s spool valve in the op
-
posite direction.
If working with a very narrow working width, you can use spacers on
the cylinder.
Hydraulically [plows with memory valve (sequence)]
> Adjust the memory cylinder with the tractor’s spool valve control.
The cylinder can be connected to a separate outlet on the tractor, or
together with the headstock hydraulic cylinder, as a sequence or
memory sequence.
This diagram shows hydraulic working-width
adjustment
Working width
Stop nut
Summary of Contents for ES
Page 9: ...Safety 9 ...
