Adjust the plow
51
Trash board [+]
The trash board should be positioned with its front edge tight up to the
mouldboard; its back edge should be adjusted in accordance with the
plowing depth.
The bracket for the trash board has two adjustment holes, one for
deep plowing and one for more shallow plowing (A). There are also
two slots in the trash board to allow for additional adjustment (B).
T
IP
!
When commissioning the new plow, it is a good idea to adjust the trash
board in the upper position to strip the paint from the plow bodies when
plowing.
T
IP
!
It may be a good idea to adjust the height of the trash board when
changing the working width.
Soil packer arm [+]
Position of the packer
•
Place the conventional packer so that it allows at least two furrows
to remain unpacked. This allows you to check the connection be
-
tween following rounds.
•
The length of the arms (B) must be adjusted so that the tractor
wheel runs clear when you are returning.
> Adjust the stay tightener (A)
B
A
A
B
B
Summary of Contents for ES
Page 9: ...Safety 9 ...
