36
Transport
Hydraulic depth wheel
To change to transport position
> Lift the plow slightly
> Stabilize the lower links
> Adjust the plow to it's narrowest working width
> Lift the wheel slightly. This eases removing of the bolt.
> Remove bolt from hole B. This enables free rotation of the wheel.
> Move the release plate into position X.
> Insert bolt in hole A.
>
Remove the bolt from hole Y
> Turn the wheel arm to the transport position
> Insert the bolt into hole Z
> Turn the plow carefully into butterfly position. Ensure that the trans
-
port lock locks.
> Lower the plow until it rests on the transport wheel
> Disconnect the top link from the tower
\
WARNING
> Activate the transport lock on the headstock so that the locking
pin (spring-loaded) pops out.
Bolt and ring pin
Lift slightly
Hole A
Hole B
Release plate
X
Y
Hole Z
Bolt
Hole Y
Handle
Unlock
Transport position
Summary of Contents for ES
Page 9: ...Safety 9 ...