60
Care and maintenance
Replace hoses
> Release the pressure in the hydraulic system
> Connect the hoses from the tractor
> Remove the old hose.
> Fit the new hose
> Carefully tighten all connections
Replace worn
parts
•
Replace all parts which go down into the ground and other parts
when they are worn out or damaged.
•
Use original Kverneland parts only.
> Remove the old part.
> Fit the new part
> Remove paint from all surfaces which are in contact with the
ground.
T
IP
Landsides
When rotating landsides are worn down to approx. 5 mm (0.2 inches)
at the end, they can be rotated from the bodies on the right-hand side
to the left-hand side.
T
IP
Reversible point
When reversible points are worn out on the outermost edge, they can
be reversed.
\
WARNING
Check the length of the hose
Check the length of the hose on the plow for sufficient slack.
Overly taut or stretched hoses can become damaged or broken.
\
WARNING
Replace the hydraulic hoses
•
Immediately when they have become worn or defective.
•
Every 6 years
Summary of Contents for ES
Page 9: ...Safety 9 ...
