30
Connecting
Connection geom-
etry
To obtain a stable first furrow width, the intended pulling point between
the lower link arms must be 1/3 of the axle distance behind the front
axle. If this is not the case, use a cross shaft with a different length.
→
»Cross shaft« page 16.
Clearance
between the depth
wheel/plow and
the ground
Reversing with the bodies above the frame
Once the plow is connected to the tractor, first make sure that the
depth wheel has sufficient clearance from the ground during revers
-
ing. If there is not sufficient clearance, do one of the following:
•
Connect the top link to a higher hole on the plow
•
Connect the top link to a lower hole on the tractor
•
Position the cross shaft in a lower hole
→
»The position of the cross shaft«, page 74
Clearance
between the
tractor and plow
If there is not sufficient clearance between the tractor and plow, rotate
the cross shaft’s attachment plates to the headstock
→
»The position of the cross shaft«, page 74
wrong
right
Summary of Contents for ES
Page 9: ...Safety 9 ...
