Kverneland EDW2, Manual, Page: 81 / 89

8. Electrical hopper cover
81
The electrical hopper cover (tarpaulin) is an option on the bigger spreader range
The maximum opening and closing position can be adjusted by the screw on the motor:
1. Remove the 2 stainless steel screws. These screws are plugs to prevent water and dirt can
enter the motor.
2. After removing the plugs the motor can be adjusted by 2 screws (Allen key number 4)
• The top screw is for adjusting the maximum closing position
By turning clock wise the cover will close further
By turning anti clockwise the cover will close less far
• The bottom screw is for adjusting the maximum opening position
By turning clock wise the cover will open further
By turning anti clockwise the cover will open less far
At the maximum closing and opening position there should be a little tension on the cover itself.
Adjustment for closing
Adjustment for opening
8.1 Adjustments