Kverneland EDW2, Manual, Page: 35 / 89

Start position
Screen 2: Curve Calibration Menu
Kg/min values changing after auto
calibrations are done
Activate Trim flow sensor
Note: Make sure correct
value is selected behind
Pin code 5
Tramline assistant (does not work with
simulation speed)
Speed signal source
Speed filtering adjustment
Set Ref sensor value on zero
(maximum deviation of 25, when
bigger, recalibrate complete system).
(Pin 5 calibration)
Empty hopper weight (actual weight)
When offset is bigger then 25 kg please do
Pin 5 calibration
Alarm minimum battery voltage
Alarm disc speed, checks only
if disc is running, not rpm
Overdosing, select kg or %
Side for manual calibration
Grease alarm. (every 8 hours pop-up)
Screen 3: Settings screen
Activate border spreading plate only for
manual border spreading plate.
Fil in the remain distance (left or right)
between the hart of the tractor and the
border (see also capture 5)
Activate manual auto calibration process
Emptying the hopper
(left, right or both)
Grease function
Field registration only active without
GEOCONTROL
3 Software screens
35