Kverneland EDW2, Manual, Page: 2 / 89

Table of contents
1. System overview 3
1.1 ISO spreader with a Non-ISO tractor 4
1.2 ISO spreader with IM Tellus, Tellus GO or PRO 4
1.3 ISO spreader and ISO tractor 5
1.4 Control boxes 6
1.4.1 IM Tellus GO 6
1.4.2 ISO Match Tellus and Tellus PRO 7
1.5 IM power (IsoMatch power) 8
1.5.1 Battery cable 9
1.5.2 IM Tellus connection cable 11
1.5.3 ISOBUS connector 12
1.6 Communication- and power cables (Machine side) 13
2. Sensor and actuators 14
2.1 EDW2 PCB 14
2.2 TrimFlow sensor 17
2.3 Inductie sensor (RPM) 19
2.4 Reference sensor 21
2.4.1 Check the reference sensor 21
2.4.2 Testing the reference sensor 22
2.5 Load cells 23
2.5.1 Check load cells 24
2.5.2 Test the load cells one by one 25
2.6 Actuators 26
2.6.1 Testing the actuators 27
2.6.2 Measure the actuators 28
2.6.3 Repairing the actuators 29
3.Software screens 31
3.1 Machine software EDW ISO II 1.17 32
3.2 Spreader screens 33
3.3 Service screens: Settings behind PIN Code 38
3.4 Virtual Terminal setting and GEOCONTROL 41
3.5 Dignostic menu 43
4. Calibrations 46
4.1 Actuators calibration 46
4.2 Hopper calibration: (Pincode 5) 47
4.3 Hopper calibration: (Except CL EW and RO-M EW (Pincode 8) 52
4.4 Hopper calibration: RO-M EW CL EW (Pincode 8) 58
4.5 Speed sensor calibration 62
4.6 Diagnoctic stored calibrated value check 64
5. Border spreading and GEOCONTROL 65
5.1 Manual border spreading plate and GEOCONTROL 65
5.2 Hydraulic border spreading plate and GEOCONTROL 68
6. Implement setting GEOCONTROL 71
6.1 Calculating B distance 71
6.2 B setting under field conditions 73
7. Trouble shooting 76
7.1 Alarms and errors 76
7.2 Trouble should Flowchart weighing system 79
7.3 Trouble should Flowchart actuators 80
8. Electrical hopper cover 81
8.1 Adjustments 81
8.2 Connection on PCB and software 82
9. Empty hopper sensor 83
9.1 Warnings 84
9.2 Components 85
9.3 PCB connection and software 86
9.4 Machine box HLM 87
9.5 Settings 88