Kverneland 4328LT, Service Manual

Page: 23 / 154

23
Semi Swing, how it works
SemiSwing, how it works
1
2
Tine conditioner
Semi Swing, how it works
1. A free swinging tine will always try to reach the active centrifugal line (1)
Force to move finger from working position is 0 kg (0lb) Constant
movement during work, 900 times per minute, causing wearing on pivot
point of tines.
2. A Semi Swing tine will always try to reach the active centrifugal line (2)
Concept of Semi Swing is preventing tines from reaching this position.
Force to move finger from working position is 22 kg (48lb) Tines are fixed
during normal work, only in case of stone ore foreign obstacle (higher force
than 22 kg (48lb)) the tine will move back and let obstacle pass.
No wearing on pivot point of tines
.
22 kg (48lb )