Kverneland 4328LT, Service Manual

Page: 134 / 154

134
Replacement/synchronizing of
rollers
• Fit and secure the moveable
transmission box, use a torque of
80 Nm (59 ft/lb) for the bolts.
• Fit the spring.
• Fit the side plate.
Note; For the setting of the belt
tension, rotor clearance and roller
tension; please look at slide 26-28
Fitting of rollers
Maintenance
• Fill the 2 gearboxes with oil.
• Run the machine for a few
minutes to see if there are no
vibrations.
1 =
2=
• Fit the bracket
Z
for height
adjustment.
• Fit the rod Y
• Turn the bolt (X) counter clockwise
until the top plate will come loose
from the wooden and remove the
block.
• Fit the linchpin and lock plate.
(position X).
Y
X
Z
Oil plug 1
Oil plug 2
• Fit Pulleys (check alignment) ,
belts (tension 75 mm or 3”),
brackets with springs, belt cover
and side plates etc. back again.
• Adjust the rollers with a minimum
distance of 5 mm (3/16”)
5 mm
(3/16”)
Replacement/synchronizing of
rollers Replacement/synchronizing of
rollers Replacement/synchronizing of
rollers
Fitting of rollers
Fitting of rollers Fitting of rollers