100
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Disassembling Main Gearbox
LH drawbar
Disassembling Main Gearbox
LH drawbar
Disassembling Main Gearbox
LH drawbar
Disassembling Main Gearbox
LH drawbar
Tools
: Chisel, hammer, snap ring
pliers, pipe, hammer, extractor.
•
Disassemble oil seals (38) and
cap (36), using chisel and
hammer.
•
Disassemble snap rings (33),(34),
shims (9),(20). Hit the shaft (15)
from side (A), pick up outer ring
(24) and inner ring (23),
disassemble outer ring (23), using
pipe and hammer.
•
Pick up gear (18), spacer (19),
shim (6), gear (17) and spacer (2).
•
Disassemble inner ring (24), from
shaft (15) using a pipe and
hammer, pick up shim (5).
•
Clean all the components from
remaining grease and silicone.
•
Replace any particular damaged.
•
When assembling the taper roller
bearings pay attention to not
make any pressure on the cages
in order to avoid any damage.
•
When assembling oil seals avoid
contact with cutting parts in order
to prevent any damage to the
inner lip.
•
Disassemble oil seal (39), snap
ring (30), shim (7), bearing (22)
using an extractor.
•
Hit the pinion shaft (16) from side
(B) in order to extract it.
•
Disassemble outer ring (25),
using pipe and hammer.
•
Disassemble inner ring (25) and
shim (8), from pinion shaft (16),
using pipe and hammer.
Tools
: Pipe, hammer, snap ring
pliers, chisel, torque meter.
•
Assemble outer ring (24), using
pipe and hammer, shim (20) and
snap ring (34).
•
Assemble inside housing (10) :
inner ring (24), shim (5), crown
wheel (18), shim (6), spacer (19),
gear (17), shaft (15), using a
chisel and hammer, spacer (2),
inner ring (23), outer ring (23),
using pipe and hammer, shim (9)
and snap ring (33).
•
Hit the shaft (15) from both sides
in order to set the axis.
•
Check the value axis preload
with a torque meter, that must be
to 0÷3 Kgcm.
Maintenance
Summary of Contents for 4328LT
