Kverneland 4328LT, Service Manual

Page: 131 / 154

131
*
Maintenance
Replacement/synchronizing of
rollers
Removal of rollers
Replacement/synchronizing of
rollers Replacement/synchronizing of
rollers Replacement/synchronizing of
rollers
• Carefully guide the end of the
lower roller in and through the
slot on the RH side of the
machine.
• Fit the cover plate for the slot.
Fitting of rollers Fitting of rollers Fitting of rollers
Top roller;
•
Guide and fit carefully the upper
roller in through the LH side of
the machine.
• During the fitting of the roller, use
e.g. a fork lift for support.
• Carefully guide the end of the
upper roller in and through the
slot on the LH side of the
machine.
• Fit the cover plate for the slot.
Lower roller;
Guide and fit carefully the lower
roller in through the RH side of the
machine.
•
During the fitting of the roller, use
e.g. a fork lift for support.
• Fit the bearing on the shaft on
the LH side of the roller.
• Fit and secure the bearing on the
machine.
NOTE; The ring must not be tighten
and secure to the shaft !
Lower roller;
•
Remove and guide the lower
roller out through the RH side of
the machine.
• During the removal of the roller,
use e.g. a fork lift for support.