Kval ON-3V, Operation Manual

Page: 57 / 72

Staging Area Controls
3-9
KVAL Manual
Staging Area Controls
Controls are located at the door placement area. The controls are designed for safety during the
operation of the machine. The controls can pause the machine to allow safe entry, disable the lift,
reset the lift, and apply emergency stop. In addiction to controls, a Light Safety Curtain protects
the entrance to the placement area.
Note:
See “Staging Area Controls” on page 2-11 , for further descriptions of the Stag
-
ing Controls.
FIGURE 3- 8.
Staging Area Controls
Request Access Button:
Press to enter the staging
area safely. Mainly to load
doors to be processed.
Reset Light Button:
If the light curtain is broken,
press to reset the safety cir
-
cui t.
Pause/Resume Lift:
Press the Pause/Resume
Button to disable or pause the
process cycle. To resume the
process, push the button
again.
Emergency Stop:
Press the Emergency button
to stop machine. Will maintain
clamp and lift. To restart
machine, see “Shut Down
and Recovery” on page 2-8. .