Kval ON-3V, Operation Manual

Page: 53 / 72

About the Feed Table
3-5
KVAL Manual
About the Feed Table
The feed table is synchronized with the Carriage and the 990 series machine. The combination of
sensors and programming combine to create timing to load, unload, or rotate the door. The door is
elevated on four sets of bars with urethane rollers, and then pulled sideways to a fixed fence for
alignment to the next machine or unloading the doors.
About the Feeder Table
The Feeder Table aligns the doors to be transferred to the next machine.
FIGURE 3- 4.
Machine Table Assembly Locations
Pop-Up Cylinders: (x4)
Elevates rollers to move
door to the fence
Cross Feed/ and Feed Motor:
When cross feed belts pop-up
this motor moves the door to
the fence.
When cross feed cylinders re
retracted, door is fed into table.
Feed Rollers:
Moves door out
Cross Feed Belts (X2):
Moves door to the fence.
Bottom View
Top View
Photo Sensor:
Outfeed
Photo Sensor:
Mid Machine and at Fence
Photo Sensor:
Infeed
Door Bumpers
Cross Feed Belts (X2):
Moves door to the fence.