Kval ON-3V, Operation Manual

Page: 35 / 72

Staging Area Controls
2-11
KVAL Manual
Staging Area Controls
Controls are located at the door placement area. The controls are designed for safety during the
operation of the machine. The controls can pause the machine to allow safe entry, disable the lift,
reset the lift, and apply emergency stop. In addiction to controls, a Safety Curtain protects the
entrance to the placement area.
Emergency Stop
Press the Emergency button to stop machine. Will maintain clamp and lift.
To restart machine, see “Emergency Stop” on page 2-11.
To Enter Staging Area (Request Access)
To Exit the Staging Area
Blinking
Push
Solid
OK to Enter
1.
Push the
Request Access Button,
the blue light will
blink
and the
lift will move a door over the roll
-
ers.
2.
After door is over rollers and the
light becomes
solid
, it is safe to
enter the Door Staging Area.
Press
Pull Out
3.
After task is completed, exit the
Door Staging Area and PULL
OUT the
Request Access Button
4.
Press the
Reset Light Curtain But
-
ton
to continue with the process.
The
Request Access Button
will
turn to a steady blue color.
To Pause and Resume the Process
Press the
Pause/Resume Button
to disable or pause the pro
-
cess cycle. To resume the process, push the button again.