Kurzweil Forte 7 Musician'S Manual Download

Page: 183 / 244

Storage Mode

The LOAD Page

11-9

OPEN

Pressing the Open soft button will open the highlighted folder, or open

the highlighted Kurzweil ﬁ le allowing you to select individual objects

PARENT

Selecting Parent will close an existing open folder.

FILL

Selecting FILL means you would like to keep the existing User

Programs or Multis. Forte will now load the User Programs/Multis into

the ﬁ rst empty ID slot it ﬁ nds, and then subsequent empty slots

OVERWRITE

( OVWRTE)

Selecting

OVWRTE ﬁ rst deletes all the existing User Programs or

Multis, and then loads the new User Programs or Multis into the ﬁ rst

user location at ID number 1024 onwards.

During the load process the screen will show information about the objects that are being

loaded. At the end, the screen will display a message indicating if the load process was

successful, or if there were errors.

Example Using LOAD

The following example shows how each different loading methods affect how four programs

load into the User bank that already contains programs.
Example: Starting with the following objects already stored in the Forte User bank:

Programs currently in Forte

Program ID

Program Name

1024

3rd World Order

1025

PC3 Strings

1028

JuPiTaR BazZ

1031

VA1 Lead

Suppose you were to load a FOR (Forte) file containing the following Programs:

File to be Loaded

Program ID

Program Name

1025

Synth Horn

1026

NYJazzy

1027

Saxxy

1028

Stabbatha

Summary of Contents for Forte 7





















































































































































































































































Search results

Summary of Contents for Forte 7

Reviews:

Related manuals for Forte 7

Brands by name

Popular brands

Kurzweil Forte 7, Musician'S Manual

Search results

Summary of Contents for Forte 7

Reviews:

Related manuals for Forte 7

Brands by name

Popular brands