manualshive.com logo in svg

Kurzweil Forte 7, Musician'S Manual

Introducing the Kurzweil Forte 7, a powerhouse for musicians seeking an exceptional performance instrument. Unlock its full potential with the comprehensive Musician's Manual, available for free download at manualshive.com. This invaluable resource equips you with the knowledge to maximize your creativity and harness the true capabilities of the Forte 7.

Share
Download
background image

Multi Mode

Save User Multis

8-15

Save User Multis

To save changes to the current User Multi, or to save a changed Factory Multi to a User 

Category, press the Save button once. 

You can save Multis with ID numbers from 1024 to 2047. If you are saving a Multi that has 

not been previously edited, the next available unused ID number will be selected. If you are 

saving a previously edited User Multi, the ID number that the Multi was last saved with will 

be selected. Press the Value Jump double button press (Pr Next) to toggle between 

selecting the ID number that the Multi was last saved with and the next available unused ID 

number. When viewing the Save Dialog, you can quickly save the Multi to the displayed ID 

number by pressing the Save button again.

Summary of Contents for Forte 7





















































































































































































































































Reviews:

No comments

Related manuals for Forte 7

Niko 10-901 Manual preview
10-901
Brand: Niko Pages: 24
A4Tech G800R User Manual preview
G800R
Brand: A4Tech Pages: 4
NCR 6932-2202-9090 User Manual preview
6932-2202-9090
Brand: NCR Pages: 60
Kawai X50-D Owner'S Manual preview
X50-D
Brand: Kawai Pages: 44
Waeco Refresh-o-mat HD Operating Manual preview
Refresh-o-mat HD
Brand: Waeco Pages: 300
Cherry G83-6104 Technical Data preview
G83-6104
Brand: Cherry Pages: 2
Toyota 100 Series Manual preview
100 Series
Brand: Toyota Pages: 11
IRTrans IRTrans USB User Manual preview
IRTrans USB
Brand: IRTrans Pages: 16
BEALE AK280 User Manual preview
AK280
Brand: BEALE Pages: 41
Zoom 9005 Quick Start Manual preview
9005
Brand: Zoom Pages: 6
Franklin BOOKMAN COL-640 User Manual preview
BOOKMAN COL-640
Brand: Franklin Pages: 28
Franklin DBE-118 User Manual preview
DBE-118
Brand: Franklin Pages: 29
Franklin DBE-1490 User Manual preview
DBE-1490
Brand: Franklin Pages: 79
Franklin Collins DMQ-1870 User Manual preview
Collins DMQ-1870
Brand: Franklin Pages: 97
Gigabyte AIRE K17 User Manual preview
AIRE K17
Brand: Gigabyte Pages: 5
Bakker Elkhuizen UltraBoard 940 User Manual preview
UltraBoard 940
Brand: Bakker Elkhuizen Pages: 11
Franklin MWS-3053 User Manual preview
MWS-3053
Brand: Franklin Pages: 22
Totally Wicked DI6 User Manual preview
DI6
Brand: Totally Wicked Pages: 30

Brands by name

Popular brands

Load more brands