manualshive.com logo in svg

Kurzweil Forte 7, Musician'S Manual, Page: 155 / 244

Share
Download
Kurzweil Forte 7 Musician'S Manual Download Page 155

Global Mode

MAIN1 Page

10-5

Power Off Time

If the Auto Power Off parameter is set to On, then the Forte will power off after the time 

selected by the Power Off Time parameter has elapsed. The Forte will display the following 

warnings before powering off. Press a key or move any Forte control to dismiss the warning 

message. After dismissing this message, the Forte will wait the selected amount of time before 

showing this warning again.

Audio Input

If you have an MP3 audio player plugged into the Forte’s rear “Audio In” jack, setting this to 

On will allow audio to be heard. This signal will be mixed with sounds normally generated 

by the Forte.

Clock Source

With the Clock Source parameter set to Internal, Forte plays using its own Tempo. If you 

wish to sync the Forte to the tempo of an external device, use the External setting.

Out Pair B Mode

The B Audio Outputs can either be used as a second set of stereo (auxiliary) outputs by 

setting this parameter to “Normal” or they can be used to mirror the main A Audio Outputs 

by setting this parameter to “Mirror Primary Outputs”. By default this parameter is set to 

Normal.

Audio Out S/M

The audio outputs are normally used as a stereo pair; however, on occasion the Forte might 

be operated in Mono mode by plugging an audio jack into the Left A Audio Output.  Setting 

this parameter to Auto allows the Forte to detect the audio connections and adjust to mono 

output if required. The parameter can be set to Stereo, to force the Forte to output a stereo 

signal always and ignore the audio output detection.  By default this parameter is set to Auto.

Summary of Contents for Forte 7





















































































































































































































































Reviews:

No comments