manualshive.com logo in svg

Kurzweil Forte 7, Musician'S Manual

Introducing the Kurzweil Forte 7, a powerhouse for musicians seeking an exceptional performance instrument. Unlock its full potential with the comprehensive Musician's Manual, available for free download at manualshive.com. This invaluable resource equips you with the knowledge to maximize your creativity and harness the true capabilities of the Forte 7.

Share
Download
background image

Troubleshooting

Common Problems

13-4

If you can hear sound but it is low or distorted, check if one of the following might be the 

issue:

ISSUE

A received MIDI volume message has specified a low 

volume.

REMEDY

Set the volume of the audio system or mixer to the lowest level. 

Disconnect all MIDI cables, set the “Destination” parameter in 

Global Mode (MIDI page) to LOCAL or USB+MIDI+LOCAL and 

reset the volume level on the Forte, by pressing Panic (see 

page 3-18). Finally, slowly turn up the volume level of the audio 

system or mixer.

ISSUE

The current Multi has another controller assigned to volume, 

and it is turned down.

REMEDY

Select a different Multi. Or change the problematic controller 

setting by editing the Multi in Multi Edit Mode.

ISSUE

The audio system input is set for low impedance instead of 

high impedance.

REMEDY

Set the volume of the audio system or mixer to the lowest level, 

change the impedance setting, and then slowly turn up the 

volume of the audio system or mixer.

ISSUE

The input trim to the audio system or mixer is set too low.

REMEDY

Slowly turn up the trim.

Summary of Contents for Forte 7





















































































































































































































































Reviews:

No comments

Related manuals for Forte 7

Hama SL 570 Operating Instruction preview
SL 570
Brand: Hama Pages: 4
NCR 6932-2201-9090 User Manual preview
6932-2201-9090
Brand: NCR Pages: 60
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
swissonic ControlKey 49 User Manual preview
ControlKey 49
Brand: swissonic Pages: 32
Partner Tech International KB-78 User'S Reference Manual preview
KB-78
Brand: Partner Tech International Pages: 15
Misfit SHINE Quick Start Manual preview
SHINE
Brand: Misfit Pages: 83
Technics SX-KN6000 Owner'S Manual preview
SX-KN6000
Brand: Technics Pages: 188
Logitech TYPE - S Setup Manual preview
TYPE - S
Brand: Logitech Pages: 24
Logitech K800 Getting Started Manual preview
K800
Brand: Logitech Pages: 34
Logitech G913 Manual preview
G913
Brand: Logitech Pages: 51
Logitech 968019-0403 - Classic Keyboard 200 Wired Limited Warranty preview
968019-0403 - Classic Keyboard 200 Wired
Brand: Logitech Pages: 2
Logitech G510 Getting Started preview
G510
Brand: Logitech Pages: 148
unbranded UB-15MSKB Quick Setup Manual preview
UB-15MSKB
Brand: unbranded Pages: 2
Targus AKF003 User Manual preview
AKF003
Brand: Targus Pages: 15
Targus AKB863 User Manual preview
AKB863
Brand: Targus Pages: 15
perixx PERIBOARD-422 User Manual preview
PERIBOARD-422
Brand: perixx Pages: 21
HYPE HY-1022-MINI User Manual preview
HY-1022-MINI
Brand: HYPE Pages: 21
usa-spec PA10-VW Owner'S Manual preview
PA10-VW
Brand: usa-spec Pages: 11

Brands by name

Popular brands

Load more brands