Kurabo QuickGene-Auto240L, Operation Manual

Page: 76 / 78

3 Operation Method - Full-Auto Protocol
62
QuickGene-Auto240L Operation Manual
3
Holder/Wear
Parts
Treatment Remarks
Cartridge
Holder
Open cover by releasing locks at 3 places
on cartridge holder.
Pull out and dispose of cartridges one by
one.
Note:
Remove cartridge in such a way that tip does
not contact cartridge holder.
If cartridge tip contacts cartridge holder, refer
to "7 Daily Inspections and Maintenance"
and wash and dispose of cartridge holder.
Waste Tube
Holder
Remove waste tubes from waste tube
holder and dispose of waste fluid and
waste tubes.
Biohazard:
Removed waste fluid and waste tubes should
be disposed of in accordance with customer's
infectious waste treatment manuals.
Cleaning Fluid
Bottle
Reagents remaining in cleaning fluid
bottle should be sealed as is and stored.
When washing cleaning fluid bottle, refer
to "7 Daily Inspections and
Maintenance".
Note:
When storing cleaning fluid bottles, securely
close caps.
Waste Container Dispose of waste in waste container.
When cleaning waste container, refer to
"7 Daily Inspections and Maintenance".
Biohazard:
Waste should be processed in accordance with
customer's infectious waste treatment
manuals.
<10> Post Treatment of System
Refer to "7. Daily Inspections and Maintenance" and carry out system maintenance as necessary.
(1) Close all system doors
The isolating operation is now complete.
If the operation is to be continued with a full-automatic protocol, start from "3.3 Preparation of
Reagent".
Important: If the system will not be used again for more than 1 week, refer to "7.2 When
System Not in Use for More than One Week" and carry out maintenance.